3M 48C MATTE ENVISION™ NON-PVC 3.3 MIL 5YR

  • Sale
  • $556.00


3M 48C MATTE ENVISION™ NON-PVC 3.3 MIL 5YR

 3.3 Mil Matte Calendered Removable Non-PVC printable film optimal for promotional indoor and outdoor applications

  • Good for partial vehicle graphics
  • 3M Controltac & Comply technology for slideability and bubble-free installation
  • Dimensionally stable at high temperatures and stretchable at low temperatures
  • Good for flat simple curves
  • 5 year durability
  • Caution:  Always pre-test vinyl installation on vehicles.  Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle
  • Print Compatibility: Solvent, Eco-solvent, UV and Latex

Product Features
• Pressure-activated adhesive for easy sliding, tacking, snap-up and repositioning
• Non-visible air release channels for fast and easy, bubble-free installations
• Removable
• Expected Performance Life (unwarranted period of time)
- Most General Signage: 5 years in a vertical exposure with typical usage and graphic protection.
- Indoor Floor Graphics: 1 year when used in a horizontal indoor exposure with typical usage and protected by 3M™ Scotchcal™ Luster Overlaminate 3645
- Indoor Floor and Carpet Graphics: 3 months when used in a horizontal indoor exposure with typical usage and protected by 3M™
Scotchcal™ Luster Overlaminate 8509
Environmental Benefits
• Non-PVC film
• Contains no added chlorine or halogens
Recommended Types of Graphics and End Uses
• General intermediate signage for outdoor and indoor applications
• Interior and exterior building windows and dividers
• Glass and smooth walls
• Short-term indoor floor graphics (with 3M™ Envision™ Matte Overlaminate 8050M)
• Truck graphics on flat or simple curved areas
• Partial vehicle wraps on flat or simple curved areas
i IMPORTANT NOTE
Floor and carpet graphics are for use on indoor floors only. They require the use of overlaminate 3645 or 8509, which
provides a slip-resistant surface.
When applying graphics to carpet, it is solely the user’s responsibility to be aware of and comply with the Americans
with Disabilities Act Standards for Accessible Design, which includes, but is not limited to:
302.2 Carpet. Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or
no cushion or pad. Carpet or carpet tile shall have a level loop, textured loop, level cut pile, or level cut/uncut
pile texture. Pile height shall be 1/2 inch (13 mm) maximum. Exposed edges of carpet shall be fastened to floor
surfaces and shall have trim on the entire length of the exposed edge.
4