TPMS Relearn Tool for Ford Jeep Dodge Subaru

The package does not include the battery, please buy it by yourself.

Universal Car TPMS Tool Function:

U508 sends a RF signal to the TPMS sensor mounted to the vehicle's wheel to """"wake up"""" the sensor. Once the tool triggers the sensor, that is ready to communicate with the vehicle's ECU.

U508 Car TPMS Reset Tool Instructions:

Before do TPMS reset, please make sure the car already coding and enable the TPMS function, this is very important. You can use Forscan software with ELM327 to enable the function or use VCMII hardware to enable as well.

While holding the tool next to the side wal of the tire above the sensor, press and hold the button to trigger the sensor (You can also press the tool directly against the sidewall of the tire). Agreen signal light will illuminate on the tool, Continue to hold the button down until the vehicle's horn """" beeps"""".

Easy To Use: 

No need install any software, only need install a 9V battery. Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. 

Depress the button above the device while holding the tool against the tire sidewall. When the car horn sounds,press the button below the device,the “TX”LED indicates that the tool is transmitting.

Steps to set car in TPMS Re-Learn mode:

For series vehicles:

1. Set the parking brake, turn the ignition switch to ON/RUN with the engine off.

2. Type A - Choose TPMS relearn mode in the dashboard setting, hold pressing the key for 5 seconds.

    Type B - Choose TPMS relearn mode in the dashboard setting, press and hold SET/RESET button until a double horn chirp sounds.

    Type C - Press the Remote Keyless Entry (RKE) transmitter's LOCK and UNLOCK buttons at the same time for 5 seconds.

3. Horn will sound twice and TPMS indicator flashes, then learning mode has been entered successfully. Start from the driver side front tire (LF).

For Ford series vehicles:

1. Set the parking brake.

2. Ensure ignition switch to OFF, press and release the brake pedal for 1 time.

3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.

4. Press and release brake pedal.

5. Turn ignition OFF position.

6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.

7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Start from driver side front tire (LF) .

With Integrated Key FOB (actual key contained in key FOB) Push button start:

1. With vehicle off, press and release the brake pedal.

2. Using the push button, press and hold the button until the vehicle goes to acessory mode ( ACC Mode).

Warning do not push release too quickly.

Push - Wait for sound - Release.

3. Power off by pushing the button 1 tme.

4. Repeat 2 more times, ending in ACC mode.

5. Press and release the brake dedal, then turn vehicle off.

6. Using the push button, press and hold the button until the vehicle goes to acessory mode.

7. Power off by pusing the button 1 time.

8. Repeat 2 more times, ending in ACC mode.

9. Horn will sound once and TPMS telltable will blink once train mode is initiated. Starting from LF tire.

 Other brands cars enter to relearn mode please refer to car user manual

 Packing List:

1pc * U508 Universal TPMS Reset Tool

• PERFECT AUTOMOTIVE TIRE PRESSURE MONITOR SENSOR: U508 tpms relearn tool can be activated by done alone within 3-5 minutes. Save time and money, much better than going to a dealer or tire storage just to reset the tire pressure monitor sensor.
• WIDE VEHICLE COVERAGE: This tpm activation tool works on most vehicles equipped TPMS system, Please check the exact car model list on product description to check whether your car compatible with U508 tpms tool, more models will be updated in future after being tested!
• TPMS RESET TOOL: U508 is an essential tool with a 315MHz or 433 MHz tire pressure monitoring system,of replacement tire pressure sensor, tire pressure alarm remove or exchange tires.
• ONLY 3 STEPS: 1. Make sure your car is in the TPMS Learning Mode, 2. Hold the tire sensor tool against the sidewall of the tire, near the valve stem. 3. Depress learn button while holding the tool against the tire sidewall until horn bleeps once.
• FRIENDLY TIPS: [1] Each car has a different way to enter the learning mode, you can refer to the user manual of the car; [2]Subaru vehicles are different from the other vehicles, it needs to use another obd2 scan tool to into the learning mode; [3] When using U508 tpm relearn tool, please make sure antenna in the correct position; [3] Not for heavy trucks and van with more than 4 tires & Please use NEW 9V battery (NOT Include) 【Provides 24 months warranty, relieve all your worries】